News

Here you can quickly find the information you need

Single System Repeater Manufacturer introduce the CAN Repeater Hardware Circuit Design

The structure of the CAN repeater hardware. Single System Repeater the manufacturer tells you that the CAN repeater is mainly composed of two CAN controller interfaces. The Single System Repeater manufacturer tells you that the CAN repeater's microcontroller is responsible for the monitoring tasks of the entire repeater.

Explore Now

Single System Repeater manufacturers introduce the main monitoring program of the repeater

The Single System Repeater manufacturer tells you that the repeater software mainly includes the following subroutines: initialization subroutine, main monitoring program, receiving interrupt subroutine, and sending subroutine. The Single System Repeater manufacturer tells you that the writing method of the initialization subroutine is the same as that of the general CAN bus system intelligent node, but different initialization parameters should be used when initializing the two CAN controllers. The main monitoring program is mainly introduced below.

Explore Now

Single System Repeater Manufacturer introduce the software and hardware of the CAN Repeater  

1. The Single System Repeater manufacturer tells you that in addition to the main part of the repeater hardware, there are parts such as watchdog and LED indication. The Single System Repeater manufacturer tells you that several LEDs are used for repeater power-on indication and CAN interface current receiving and sending a status indication, as well as interface communication failure (such as bus off) indication.

Explore Now

Advantages of the Single System Repeater

The advantages of using Single System Repeaters are mainly manifested in the following aspects: (1) Filter traffic. The Single System Repeater receives a packet from one subnet, and only when the packet is sent to another subnet connected to the repeater, the repeater forwards it, otherwise it does not forward.

Explore Now

Product introduction of Single System Repeater

Product name : Single System Repeater, Item : LS23K~30K. Work Frequency of Single System Repeater is CDMA450, LTE700 (A/B/C/D), IDEN800, CDMA800, GSM900 & EGSM, DCS1800, PCS1900, CDMA2000, WCDMA2100, AWS2100 , LTE2600 and so on.

Explore Now
< 1 >