News
Here you can quickly find the information you need
Triple System Repeater manufacturers take you to understand the repeaters
The Triple System Repeater manufacturer tells you that a repeater (RP repeater) is a device that connects network lines and is often used for bidirectional forwarding of physical signals between two network nodes. The Triple System Repeater manufacturer tells you that the repeater is the simplest network interconnection device. It mainly completes the function of the physical layer, and is responsible for transmitting information bit by bit on the physical layer of the two nodes, and completing the functions of signal replication, adjustment, and amplification. This extends the length of the network.
Explore Now
Dual System Booster manufacturers take you to understand the solid booster
Dual System Booster manufacturers tell you that the firing command for the SRB, also known as the solid booster, is issued by the computer in the orbiter, and the signal goes through the main event controller to the Pyro Ignition Controller (PIC) on the mobile launch pad 16 seconds before launch, the launch processing system powers the PIC low voltage, and the PIC uses the low voltage to activate the detonator.
Explore Now
Dual System Booster manufacturers take you to understand the two types of booster
1. Liquid rockets. Dual System Booster manufacturers tell you that a liquid rocket booster ("liquid booster" for short) is a small rocket with liquid fuel that is tied to the first stage of the rocket core stage to increase the rocket's carrying capacity. The Dual System Booster manufacturers tell you that, unlike solid rocket boosters, liquid boosters can cut off the propellant supply to emergency braking when necessary, which is important for manned spacecraft launches.
Explore Now
High Power ICS Repeater manufacturers take you to understand what is a repeater
High Power ICS Repeater manufacturers tell you that in the field of communication, repeater has the following meaning: an analog device that enhances and amplifies the input signal, regardless of the type of input signal (analog or digital). High Power ICS Repeater manufacturers tell you that repeaters are used to strengthen the signal on the cable and send the signal farther to extend the length of the network. When an electronic signal is transmitted on a cable, the signal strength decreases with the increase of the transmission length. Therefore, the repeater is required to strengthen the signal again to increase the transmission distance of the data.
Explore Now
Brief introduction of the high power ICS repeater
The product name is High Power ICS Repeater, and the Item is SI30B~SI43B. Details: Lenolink high power ICS repeater uses digital technology to process the RF signal. The repeater can detect and cancel the interference through the receiving signal so that to avoid oscillation and reduce isolation. With ICS technology, both server antenna and donor antenna can be installed in the same pole, which saves the installation cost and complexity.
Explore Now