News
Here you can quickly find the information you need
Single System Repeater Manufacturer introduce the software and hardware of the CAN Repeater
1. The Single System Repeater manufacturer tells you that in addition to the main part of the repeater hardware, there are parts such as watchdog and LED indication. The Single System Repeater manufacturer tells you that several LEDs are used for repeater power-on indication and CAN interface current receiving and sending a status indication, as well as interface communication failure (such as bus off) indication.
Explore Now
Advantages of the Single System Repeater
The advantages of using Single System Repeaters are mainly manifested in the following aspects: (1) Filter traffic. The Single System Repeater receives a packet from one subnet, and only when the packet is sent to another subnet connected to the repeater, the repeater forwards it, otherwise it does not forward.
Explore Now
Product introduction of Single System Repeater
Product name : Single System Repeater, Item : LS23K~30K. Work Frequency of Single System Repeater is CDMA450, LTE700 (A/B/C/D), IDEN800, CDMA800, GSM900 & EGSM, DCS1800, PCS1900, CDMA2000, WCDMA2100, AWS2100 , LTE2600 and so on.
Explore Now
Discount Triple System Repeater manufacturers take you to understand the CAN Repeater
The manufacturer of Discount Triple System Repeater tells you that using repeaters also has certain problems, such as (1) because the repeater stores and then forwards the received frames, which increases the delay. (2) The Discount Triple System Repeater manufacturer tells you that the MAC sublayer of the CAN bus does not have a flow control function. When the load on the network is heavy, the buffer may overflow due to insufficient storage space in the repeater, resulting in frame loss. (3) If the repeater fails, it will affect the work of the two adjacent subnets.
Explore Now
The Triple System Repeater manufacturer tells you that in the field of communication, Repeater has the following meanings. It is an analog device that enhances and amplifies the input signal, regardless of the type of input signal (analog or digital). The Triple System Repeater manufacturers tell you that repeaters are used to strengthen the signal on the cable and send the signal farther to extend the length of the network.
Explore Now